|
COATING STEEL WITH BLACK OXIDE OR ZINC
PHONE:
443-596-4439
443-596-4440
MONDAY - FRIDAY 10:00
AM - 6:30 PM
|
|
The
systems listed on this page are used to coat steel or iron with
a black or zinc coating to protect it from rust and oxidization.
Our OX black oxide systems and zinc coating systems will conform to
almost all MIL specs as well as private company specs.
Neither process will change the outer dimension of the part
being coated. OH black oxide can be used when MIL spec
conformity is not an issue. OH will meet many specs but
for getting the best true MIL or company spec work use the OX
product.
Our
two different Black Oxide system are hot blackening systems.
They are easy
to use and easy to control. The Black-OX kits and systems below
will conform to the military spec MIL-C-13924 and MIL-C-16173 as
well as many other specs. This is something that no
room temperature blackening systems can claim. The
only two advantages to using a room temp black oxide system are
not having to heat the chemical and not having to use a heated
chemical. Other than that, there are absolutely no
advantages, none, to using a cold black oxide system.
There are a dozen of automotive and military specs (MIL spec)
out there for black oxide process and the cold process does not
meet even one, not one spec. If you are seeking the best
blackening process for steel, stick with a hot black oxide
system. Our kits below will make 5, 10, 20, and 50
gallons. It comes complete with the four steps that
conforms to most specifications.
BLACK-OH Kits: Comes with the make up for Electroscrub and
Black-OH black oxide. This system is used when conforming to MIL
specs are not a critical issue.
5
gallons - $280 10
gallons - $469 20 gallons - $825
50
gallons - $1750
Larger systems as well as
complete commercial lines are available upon request. Call
for more information.
Black Oxide Post Dip (for extra corrosion resistance on your
black oxide parts - required for MIL-C-13924), comes ready to
use - $47 per four liter bottle
BLACK-OX Kits:
Comes with the make up for Electroscrub and
Black-OX black oxide. This system conforms to almost all black
oxide MIL specs.
5
gallons - $360.00 10
gallons - $625 20 gallons - $1090
50
gallons - $2,295 Larger systems as well as
complete commercial lines are available upon request. Call
for more information.
Black Oxide Post Dip (for extra corrosion resistance on your
black oxide parts - required for MIL-C-13924), comes ready to
use - $47 per four liter bottle
Zinc
phosphate is a coating used on steel or iron parts as a rust
inhibitor or as a pre painting or pre coating to give the part a
lot more protection than the paint or post phosphate coating
would give by itself. Our Zi Phos product conforms
to military spec MIL-P-16232, as well as other military,
company, and automotive specs. This process is easy to
learn, easy to use, and easy to maintain. This kit comes
in 5, 10, 20, and 50 gallons and like the black oxide kit above,
it comes with all the steps to conform to most zinc phosphate
specifications.
Zi Phos
Kits: Comes with the make up for Electroscrub, ZI PHOS, and Post
Phosphate Dip
5
gallons - $396.00 10
gallons - $669.00 20 gallons - $1,138.00
50
gallons - $2,380.00 Larger systems as well as
complete commercial lines are available upon request. Call
for more information.
Contact Info
PLEASE VIEW OUR
RETURN AND PRICING POLICY
BEFORE PURCHASING
|